Comment:	X1C3 APRS TRACKER 5W CE4ERM 144.390 MHz 0081.1Km 4.3V S07
Location:	33°31.00' S 70°45.26' W - locator FF46OL95LX - show map 9.9 km North bearing 339° from San Bernardo, Provincia de Maipo, Metropolitana, Chile [?] 11.9 km Southwest bearing 236° from Santiago, Provincia de Santiago, Metropolitana, Chile 13.4 km Northwest bearing 304° from La Pintana, Provincia de Santiago, Metropolitana, Chile 19.3 km Northwest bearing 305° from Puente Alto, Provincia de Cordillera, Metropolitana, Chile
Last position:	2025-09-29 21:33:49 UTC (1h21m ago) 2025-09-29 18:33:49 -03 local time at San Bernardo, Chile [?]
Altitude:	344 m
Course:	268°
Speed:	0 km/h
Device:	Open Source: Xastir (software, Linux/Unix)
Last path:	CE4ERM-7>APX1C3 via WIDE1-1,WIDE2-2,qAO,CE4ERM-1
Positions stored:	59506
Other SSIDs:	CE4ERM-9 CE4ERM CE4ERM-10 CE4ERM-13 CE4ERM-11 CE4ERM-1 CE4ERM-D CE4ERM-5 CE4ERM-15 CE4ERM-4 CE4ERM-3 CE4ERM-2 CE4ERM-6 CE4ERM-12

Only position packets which were originated by the station are shown here. The range statistics show some extra long hops, because some digipeaters do not correctly add themselves to the digipeater path. Please check the raw packets.

This page shows real-time information collected from the Automatic Position Reporting System Internet network (APRS-IS). APRS is used by amateur (ham) radio operators to transmit real-time position information, weather data, telemetry and messages over the radio. A vehicle equipped with a GPS receiver, a VHF transmitter or HF transceiver and a small computer device called a tracker transmits it's location, speed and course in a small data packet, which is then received by a nearby iGate receiving site which forwards the packet on the Internet. Systems connected to the Internet can send information on the APRS-IS without a radio transmitter, or collect and display information transmitted anywhere in the world.